Suspension Accessories

Modify, enhance, and optimize truck or Jeep lift kits with our complete line of suspension accessories and components. From skid plates, to traction bars and more, each accessory ensures performance in your truck, Jeep, or SUV.

• Traction Bar

  Decrease the amount of axle wrap and wheel hop in your truck caused by big tires, suspension modifications, and heavy loads.

  Up to 10% off sitewide More
• Traction Bar Bracket

  These Traction Bar Mounting kits aid in the installation of after market traction bars. Choose from various manufactures to complete the installation of specific kits or your home built units.

  Up to 10% off sitewide More
• Differential Skid Plate

  We offer a wide variety of Skid Plates, From front to rear and even under carriage protection as well.

  Up to 10% off sitewide More

• Leaf Spring Axle Shim

  These leaf spring axle shims allow you to adjust pinion angle after installing suspension components. Available in 2 widths and multiple degrees to meet your needs.

  Up to 10% off sitewide More
• Drive Shaft

  These specialty driveshaft's are designed to help you complete your lift. No more trying to find a shop to build a custom shaft, these are on the shelf ready to go.

  Up to 10% off sitewide More
• Manual Trans Shifter Relocation Bracket

  Does your transfer case shifter ever stick? Well, not anymore if you have this new shifter bracket. This 1-piece self-support mechanism will put you back in control no matter what angle you are in when you need to shift.

  Up to 10% off sitewide More

• Tie Bolt

  These leaf spring tie bolts hold your leaf spring pack together securely, a vast improvement over stock OEM tie bolts, grade 8 hardware specified and will not fail under the harshest off-road driving conditions.

  Up to 10% off sitewide More
• Leveling Kits

  These specialty kits will lift the front of your truck a small amount to make the vehicle have a level stance and allow additional clearance for oversized tires.

  Up to 10% off sitewide More
• Transfer Case Re-Indexing Ring

  When installing a large lift on your truck your front drive shaft may not be able to handle the angle, reduce the angle with these Reclocking rings.

  Up to 10% off sitewide More

• Tie Rod End Adjusting Sleeve

  These Heavy Duty Tie Rod Adjusting Sleeves will allow easy adjustment of Tie Rod Ends to help make alignments easer and more precise.

  Up to 10% off sitewide More
• Alignment Camber Kit

  Help maintain the trueness of your tires with proper Alignment. We offer all sorts of Casters, Cambers, Cam Bolts and Eccentrics.

• Link Bar

  These Link arm kits with polyurethane rotational pivot joints will have your long arm system crawling over just about anything on the trail and rolling down the highway smoothly and quietly.

• Axle U-Bolt

  When changing to a larger axle or adding a suspension lift kit don’t forget to replace your U-Bolts. Having the incorrect U-Bolts can complicate your installation and create an unsafe condition.

  Up to 10% off sitewide More
• Axle Shim

  These axle shims allow you to adjust pinion angle after installing suspension components. Available in multiple degrees to meet your needs.

• Limiting Strap

  Limiting straps are designed to limit the travel of your suspension, and extend the life of your shocks.

  Up to 10% off sitewide More

• Drive Shaft Spacer

  On many of the newer style trucks it is not necessary to replace the complete driveshaft when you can simply install a spacer to bridge the gap.

  Up to 10% off sitewide More
• Alignment Bushing

  Help maintain the trueness of your tires with proper Alignment. We offer all sorts of Casters, Cambers, Cam Bolts and Eccentrics.

  Up to 10% off sitewide More
• Transfer Case Lowering Kit

  Transfer Case Lowering Kits are designed to lessen the rear drive shaft angle by lowering the transfer case. This is done when your lift results in a driveline vibration.

  Up to 10% off sitewide More

• Alignment Kit

  Help maintain the trueness of your tires with proper Alignment. We offer all sorts of Casters, Cambers, Cam Bolts and Eccentrics.

  Up to 10% off sitewide More
• Alignment Caster/Camber Kit

  Help maintain the trueness of your tires with proper Alignment. We offer all sorts of Casters, Cambers, Cam Bolts and Eccentrics.

  Up to 10% off sitewide More
• Transmission Crossmember

  These Transmission Crossmembers for lifted vehicles are heavy duty OEM replacements that out-perform flimsy stock units. Rock proof and heavy duty. An excellent addition for the serious off-roader

• Carrier Bearing Drop

  The Carrier Bearing drop kit will help eliminate take off driveline vibration on vehicles with a two piece rear driveshaft. The Carrier Bearing drop kit shims down the carrier bearing so that the rear drive shaft angle is similar to that of the stock level.

  Up to 10% off sitewide More
• Limiting Strap Tab Kit

  When adding limiting straps we have these weld on, prefabricated tabs to save you time and aggravation.

• Pinion Angle Kit

  The upper and lower arms of a Jeep TJ / LJ can be adjustable to allow pinion angle, caster, and slight wheelbase changes for tire clearance.

  Up to 10% off sitewide More

• Alignment Cam Washer

  On many new trucks you can not adjust your alignment. These Washers will allow you to convert to an adjustable setup.

  Up to 10% off sitewide More
• Alignment Cam Guide Adapter

  On many new trucks you can not adjust your alignment. These Washers will allow you to convert to an adjustable setup.

  Up to 10% off sitewide More
• Carrier Bearing Spacer

  When installing a lift kit on a truck with a two piece drive shaft you may require a Carrier Bearing Spacer to eliminate driveline vibrations.

  Up to 10% off sitewide More

• Panhard Rod Brace

  Strengthen up your Panhard Bar with the installation of a brace kit. This will help to keep you going straight when the trail throws curve your way.

• Steering Gear Box Brace

  Help support your jeep steering box. A must have for the avid Jeepers. Easy installation, complete with instructions.

• Link Arm End

  These Wheelbase Extensions are for use in conjunction with Superlift's 4" or 6" Long-Arm suspension system only and are not compatible with other manufacturers long arm kits. These female swivel ends for front and rear arms offer an increase in wheelbase in 1,2, or 3 inch increments.

  Up to 10% off sitewide More

• Oil Pan Protection Box

  Protect your fragile oil pan from potential trail disasters by installing a oil pan protection box. These fabricated steel plate boxes are designed to bolt on around your factory pan and provide protection from trail hazards while still allowing easy access for service.

  Up to 10% off sitewide More
• Geometery Recalibration Module

  Some of your newest vehicles include a Electronic Stability Program (ESP). Creating a true performance lift system with ESP compatibility has been a stumbling block for most suspension manufacturers. These modules properly calibrated steering input signal to the factory ESP unit. The EGR module also allows for speedometer recalibration, desired when taller height tires and / or different axle gear ratios are installed. The module simply plugs into an existing wiring harness located beneath the dash.

  Up to 10% off sitewide More
• Alignment Cam Bolt

  Driveline Vibrations can occur after lifting your vehicle due to driveshaft pinion angle changes. These cam bolt kits will eliminate these vibrations by adjusting or rotating the rear pinion angle up or down as needed.

  Up to 10% off sitewide More

• Transmission Drop Bracket

  Transmission Drop Bracket; For Use w/6 in. Lift.

• Sway Bar Clamp

  Use these nifty Swaybar Clamps to keep your sway bar end links from rattling around and getting stuck in your suspension when not in use.

• Heim Joint Rebuild Kit

  Keep your Suspension Links twisting and rotating smoothly and like new with a Heim Joint Rebuild Kit.

  Up to 10% off sitewide More

• Leaf Spring Bumper

  Don't loose the fillings in your teeth. These Leaf Spring Bumpers will help to absorb the hard hits during high speed and extreme articulation situations.

  Up to 10% off sitewide More
• Leaf Spring Bumper Bracket

  These Leaf Spring Bumper brackets will help you to maintain proper suspension travel to insure that you cause any damage during extreme suspension travel situations.

  Up to 10% off sitewide More
• Suspension Control Arm Bumper

  When you raise or lower your vehicle it is important to main proper suspension travel so as to not damage vital suspension components. Use these special Control Arm Bumper brackets to keep everything working properly.

  Up to 10% off sitewide More

• Bump Stop

  Bump Stops are critical suspension components that prevent damaging bottom outs and over compression. Preserve the life of your shocks and springs with these bump stops.

  Up to 10% off sitewide More
• Coil Spring Bump Stop

  These specialty bump stops are designed specifically to work with lifted coil spring suspensions.

  Up to 10% off sitewide More
• Leaf Spring Bump Stop

  Use these Bump Stops to prevent damage to your suspension or body by limiting the travel of your suspension. These bump stops will absorb the impact of your suspension bottoming out against the frame as well as limit the travel.

  Up to 10% off sitewide More

• Tailgate Bump Stop

  These bump stops are designed to mount to the body of your vehicle and protect against your swing out tire mount from crashing into the body and causing damage.

  Up to 10% off sitewide More