Level-Lift Suspension Buyers Guide

Daystar Leveling Kits For Chevy Hd Trucks

Building a Level Lift kit for Chevy 2500 and 3500 HD trucks has always been a challenge. The HD platform uses a proven IFS torsion bar front suspension design, but the factory suspension utilizes one of seven different torsion bar keys. Each of these keys is indexed differently, which results in a wide range of factory ride heights. Leveling the stance of any torsion-bar-equipped truck involves replacing the factory torsion bar keys with new ones that have been re-indexed to allow more ride height adjustment. OE factory keys can vary up to 18 degrees. Daystar has the final level lift solution for the HD with two different torsion bar keys that provide lift regardless of how the truck was equipped from the factory. The HD torsion keys are forged from high-quality steel and designed to OE specifications, providing up to 2″ of lift to level the front. Part number KG09107 fits vehicles equipped with purple, blue, and yellow-colored factory torsion keys. Part number KG09114 fits vehicles with orange, green, white, or brown factory keys. HD owners will need to verify which factory torsion bar key their truck uses before ordering. Kits also include extended shock brackets so that the factory shock absorbers can be retained. The maximum recommended tire size this kit will allow is 285/70 or 33×11.5.

To order call 800-578-8132.

  • P/N KG09107
  • P/N KG09114

View all Daystar Leveling Kits
View all Daystar products

Fabtech 2″ Leveling Kit System For 2005-08 Ford F250/350 Super Duty 4wd Trucks

The Fabtech leveling kit system for the 2005-08 Ford Super Duty 4WD features machined coil spring spacer mounts. These are designed to level the vehicle front to rear. Fabtech utilizes the stock front coil springs, which provides a factory like ride. The level lift increases front ride height and a installation is quick and easy. This kit allows the installation of 33×12.50R17 tires with 17×8 wheels. A 4-1/2 back spacing and minor trimming is required.

To order call 800-578-8132.

  • FTS22030

Fabtech 2″ Leveling Kit System For 2007-08 Gm C/K1500 Pu And K1500 Suv/Sut (2WD and 4WD)

Fabtech offers a complete leveling kit system for late model GM trucks and SUV’s. This level lift system is designed to even out your vehicle’s ride height, while maintaining the smooth factory ride. Get the look you want and the benefit of the increased ride height when you add this level lift kit to your vehicle. This leveling kit will allow the use of 285/70R17 (33×11.5) tires.

To order call 800-578-8132.

  • FABFTS21039

Fabtech 2007-08 Toyota Tundra 2wd 2″ Dirt Logic 2.5 Coilover Level Lift System

Fabtech offers an upgrade to the common leveling kit with their 2″ Dirt Logic 2.5 Coilover System. The level lift system comes complete with Dirt Logic 2.5″ coilovers, which offer a smooth highway ride while still providing the necessary dampening for aggressive off road driving. This leveling kit system gives your truck the level look you want and the performance you need. This level lift system allows the use of 33×12.50 tires in either 18 or 20 inch wheel size with only minor trimming.

To order call 800-578-8132.

  • FTS26024 $923.99

Fabtech 2007-08 Toyota Tundra 2wd/4wd 2″ Level Lift Spacer System

Fabtech now offers a quick and easy leveling kit solution for your 2007-08 Toyota Tundra 2WD/4WD. This level lift system is designed to even out the vehicle ride height front to rear. Fabtech utilizes the stock front coil springs, which provide a factory like ride with increased height and a quick installation. This leveling kit allows the use of 33×12.50 tires in either 18 or 20 inch wheel size with only minor trimming.

To order call 800-578-8132.

  • FTS26025BK

View all Fabtech products

Pro Comp Poly Lift Leveling Kits

 

Pro Comp Suspension offers poly lift and leveling kits that are affordable and easy to install. Each of the suspension leveling systems incorporate precision engineered spacers that are molded from proprietary polyurethane, for long life. These poly lift and leveling kits raise the front of the vehicle for a proper, level stance, improving appearance. Other benefits include additional front ground clearance and the ability to fit larger diameter tires and wheel combinations on the truck. Pro Comp Poly level lift systems do not change the overall suspension or steering geometry, so the factory ride-quality is maintained. Kits are available for most popular trucks and SUVs.

To order call 800-578-8132.

View all Pro Comp Leveling Kits

Pro Comp Level Lift Suspension Systems

Pro Comp Suspension knows that leveling the front of your vehicle is one of the most asked for improvements by truck and SUV owners. Now this task can be done easily and affordably with one of the many level lift systems available from Pro Comp. Leveling kits are available to raise the front end of your vehicle from 1-1/2 to 2-1/2 inches, depending on application. If you want to give your truck a proper stance, improved appearance, added ground clearance and more room for larger tires, then Pro Comp has your level lift answer. Other advantages are, life-time warranty, heavy-duty construction, easily installed and removed.

To order call 800-578-8132.

View all Pro Comp Leveling Kits
View all Pro Comp Products

Rancho Quicklift

 

Rancho’s QuickLIFT level lift system enables the owners of popular late-model light trucks and SUVs to accommodate larger tire and wheel packages at a fraction of the cost of a traditional suspension lift.

The fixed-seat coil-overs replace OE spring-seat shock absorbers– installing in under two hours without cutting, welding or drilling. Finished in Rancho’s Liquid Metallic Silver, QuickLIFT provides 1- to 2.5-inches of additional front end lift, making this essentially a leveling kit. This allows for the use of larger wheel and tire packages plus improved off-road driving. QuickLIFT is fully compatible with Rancho MyRIDE(tm) Wireless Tuning System which features a wireless MyRIDE Controller for fast, easy tuning of QuickLIFT units.

To order call 800-578-8132.

View all Rancho products

Readylift 2.5″ Lift Kit For The 2008-09 Ford F250 Superduty

 

Not all short lifts are leveling kits. ReadyLift’s 2.5″ lift kit for the Ford F250 SuperDuty raises your truck evenly for those who need a little lift, but still mainly use it to tow and haul. This 2-1/2 inch lift kit allows for wheel and tire combinations up to 37″ while keeping the smooth OEM ride and drivability. It’s a complete lift kit including rear blocks with integrated bump stops, spring extensions, a custom panhard bracket, front bump stops, carrier bearing spacer, OEM shock extension brackets and all needed hardware. When used with the maximum size tires, the F-250 truck body is raised over 5 inches. Part number 69-2517 is designed for the 2005-2007 model F-250 trucks. Kits also available for F-350 trucks. The 69-2515 and 69-2516 are specifically designed for the Ford F-350 from 2005-2009.

ReadyLift Smart Suspension Technology is used to make this kit very user friendly to install, requiring no cutting or drilling. Like all ReadyLift kits, the F-250 lift kit is guaranteed for life against manufacturing defects.

Popular wheel and tire sizes used for this vehicle include the stock rims (17×8, 6.5″ backspacing) with 37×12.5 tires, 20×9.5 rims (5.25″ backspacing) with 35×12.5 tires, and 22×9.5 rims (5.25″ backspacing) with 35×12.5 tires.

To order call 800-578-8132.

View all ReadyLift Leveling Kits

Readylift 3″ Sst Suspension Lift System For 2007-08 Toyota Tundra Trucks

ReadyLift’s 3″ Suspension lift kit system is available for 2WD/4WD CrewMax, Double Cab and Standard Cab Models. The 3-inch intermediate Smart Strut Technology system provides an owner with the opportunity to upgrade to larger wheel and tire combinations up to 35-inches while retaining the great stock ride and handling characteristics.

This is a complete suspension lift kit that includes a powder coated steel strut extensions, front differential drop spacers, skid plate spacers and 1-inch rear lift blocks. The front strut extensions are slightly taller than the rear lift block, making this essentially a taller than standard leveling kit, leveling percentage will vary. The system requires no cutting or strut spring pre-loading and installs quickly and safely using the provided heavy-duty hardware. Quality step-by-step instructions are provided with every kit.

An alignment and zero-point calibration will be necessary upon completion of installation. Like all other ReadyLift kits, the 2007/08 Tundra lift kit is guaranteed for life against manufacturing defects.

Popular wheel and tire sizes used for this vehicle include the stock rims (17×8, 6.5″ backspacing) with 33″ tires, 20×8.5 rims with 285/65/20 tires. 35″ tires will fit with minor modifications to the skid plate.

To order call 800-578-8132.

  • P/N 69-5075

View all ReadyLift Leveling Kits

Readylift 2.25″ Leveling Kit For The 2007-08 New Body Gm 1500 6-Lug Trucks

READYLIFT’s suspension products do not require any permanent modification to factory parts and never compresses the factory springs or require cutting the strut studs and will not affect your factory OEM ride quality or comfort level. The 66-3085 leveling kit includes (2) aluminum SST Strut Extensions and (2) aluminum SST Lower Strut Mount Spacers along with all necessary hardware raising the front 2.25″ from stock while providing for the option to upgrade to 33″ tires on OE offset style wheels. This level lift from ReadyLift comes with a Lifetime Warranty. For those who plan to tow and haul with their new GM Truck, ReadyLift also offers a 3″ OE Style Rear Lift Block (66-3003). When combined with the 66-3085 front level, it restores the factory stance to put that important weight-bearing assistance rake back into your lifted truck.

To order call 800-578-8132.

  • P/N 66-3003 3″ Rear Lift Blocks
  • P/N 66-3085 GM 1500 new body style 2007-2008 2.25″

View all ReadyLift Leveling Kits

Readylift SST Suspension Lift System For The 2005-08 Nissan Frontier & Xterra Trucks

The ReadyLift offers what is essentially a leveling kit for the 2005-08 2WD/4WD Nissan Frontier and Xterra. The level lift provides a height increase of 2.5″ in the front and 1.5″ in the rear. The 69-4510 level lift kit includes (2) SST Strut Extensions, (2) Rear Spring Lift Shackles, (4) Camber/Caster Alignment Bolts and (2) Control Arm Bump Stops.

The added height increases ground clearance and allows for the installation of tires up to 32.5-inch tall tire/wheel combinations. By utilizing the stock stock struts, your truck keeps stock suspension “feel”. The included alignment kit allows for proper front end alignment. This kit can be easily removed for leased vehicles for end of lease return. Not all leveling kits can make this claim. All parts are guaranteed for the life of your vehicle.

To order call 800-578-8132.

  • P/N 69-4510

View all ReadyLift Leveling Kits

Readylift 2.75″ Sst Suspension Lift And Leveling Kit System For The 2005-08 Toyota Tacoma 2wd 5-Lug Trucks

ReadyLift’s level lift for the 2WD 5-lug Tacoma features Smart Strut Technology steel front strut spacers along with a rear lifting add-a-leaf springs. This level lift allows the use of larger tires, up to 245/75R16 (31-inch) diameter tires.Professional installation time is estimated at two to three hours. An alignment will be necessary upon completion of installation.

To order call 800-578-8132.

  • P/N 69-5510

View all ReadyLift Leveling Kits
View all ReadyLift Leveling Kits

Revtek 2.5 Inch Leveling Lift System For 2008 Toyota Sequoia

 

This level lift for the 2008 Toyota Sequoia is based on Revtek’s proven Split/Spacer design. This new leveling kit system fits both 2 & 4WDs trucks. It incorporates billet aluminum front spacers, steel differential drop spacers, rugged polyurethane rear coil spacers, and all the necessary hardware. The Sequoia leveling kit is designed to work with the stock suspension geometry, it does not require new shock absorbers. The front lift is approximately 2-1/2 inches while the rear is only 2-1/4. This results in a more level stance and allows the fitment of up tires to 35×12.5 inches in size. This level lifts features easy bolt-in installation with no drilling, cutting or welding required. Not compatible with optional air suspension.

To order call 800-578-8132.

  • P/N66-5000

View all Revtek Leveling Kits

Revtek Level Lift Systems For The 2007-09 Toyota Tundra 4WD

The RevTek level lift for the 2007-09 Toyota Tundra 4WD features their unique Split Spacer design. The leveling kit employs a preload spacer between the strut’s coil and top plate as well as top out spacers above the strut itself. Leveling kit #437 includes Split Spacers, front differential drop, rear 1-1/4-inch tapered lift blocks, U-bolt hardware and emergency brake cable brackets. This leveling kit raises the front end 2-1/2 inches and the rear 1-1/2 inches. Another level lift option is kit #437F, which raises the front only, providing even leveler ride, unloaded.

For 2WD Tundra owners, RevTek also offer the #428 leveling kit to provide the same benefits at their #437 WD leveling kits. All RevTek kits are designed for bolt-on installation, and both kits maintain the OEM suspension geometry and ride quality for maximum reliability and comfort.

To order call 800-578-8132.

  • P/N 437 for 4WD
  • P/N 437F for 2WD

View all Revtek Leveling Kits

Revtek Level Lift Systems For Dodge Trucks

The RevTek 2-inch Dodge leveling kit system utilizes tough cast-aluminum spacers that mount between the top of the coil spring and the spring perch. Installing one of these level lifts results in an even stance front to rear, and enough room to upgrade your tires up to 35 x 12.5-inch in size. The P/N 702 level lift system fits ’94-01 1500, 2500 and 3500 4WD trucks; ’02-’08 2500 and 3500 4WD trucks, and ’06-’08 1500 Mega Cab trucks. The kit installs easily–no cutting or welding is required, and the level lift system retains the stock shocks and springs for a comfortable, factory ride.

To order call 800-578-8132.

View all Revtek Leveling Kits

Revtek 2-Inch Leveling Kit For ’07-’08 Gm Suv’s & 1500-Series Pick-Ups

Owners of 2007-08 GM 1500 series trucks and SUVs can level their ride stance and make room for tires up to 33 x 12.5-inchs in size. The RevTek two-inch GM level lift system features rugged plated steel and cast-aluminum spacers. The leveling kit is designed for easy bolt-in installation and works within the stock suspension geometry. Designed for use on 2WD/4WD GM trucks and SUV’s, P/N 315 fits ’07-’08 Avalanche; Tahoe/Yukon/Yukon XL/Suburban/Suburban XL; Denali, Denali XL; Cadillac Escalade, Escalade ESV and EXT; Silverado/Sierra 1500. System comes complete with all necessary hardware and instructions.

To order call 800-578-8132.

  • P/N REV315

View all Revtek Leveling Kits

Revtek Leveling Kit Systems For Ford Super Duty

RevTek offers leveling kits for the The’05-08, 4WD Ford Super Duty. Two level lift systems are available, one for F-250 and one for F-350 Super Duty 4WD trucks.

The F-350 leveling kit system lifts the front only. This level lift includes 2.5-inch spring perch spacers, eccentric cam bushings for correct alignment, performance shock absorbers and all necessary mounting hardware. The F-250 level lift system is identically the F350 leveling kit regarding front end hardware, but also incorporates rear lift blocks and U-bolts to raise the F250 rear suspension to match that of a F-350’s rear ride height. Both leveling kit systems maintain the stock springs, work within the OEM suspension geometry, and allow clearance for tire up to 35 x 12.5-inchs in size. An optional front track bar bracket is also available to maintain correct axle centering.

To order call 800-578-8132.

  • F-250 kit P/N 6125
  • F-350 kit P/N 6126

View all Revtek Leveling Kits
View all Revtek Products

Skyjacker 2-2.5 Inch Metal Level Lift Spacers

 

Skyjacker offers a broad line of metal spacers for the front suspension on late model trucks. These spacers ban be used as a low cost level lift for many applications. Depending on the application Skyjacker’s spacers provide 2 to 2-1/2 inches of front end lift and are an effective, inexpensive, and safe way to gain front end tire and ground clearance. The Skyjacker level lift spacers simply attach to the top of the O.E. coil-over shocks/struts. Unlike the polyurethane kits, this top mount design does not require any special tools, coil spring compressor, or disassembly of the strut.

A complete leveling kit includes 2 front spacers, all the necessary hardware, and a tube of thread locking compound. It only takes about an hour and a half for most installations and does not affect the O.E. ride quality.

Skyjacker offers leveling kits for many 2WD and 4WD vehicles including Toyota Tacoma, Tundra, & FJ Cruiser, Chevy/GMC 1500 Pickups, and Ford F-150’s.

To order call 800-578-8132.

View all Skyjacker Products

Skyjacker 2-2.5 Inch Metal Level Lift Spacers

Skyjacker offers a broad line of metal spacers for the front suspension on late model trucks. These spacers ban be used as a low cost level lift for many applications. Depending on the application Skyjacker’s spacers provide 2 to 2-1/2 inches of front end lift and are an effective, inexpensive, and safe way to gain front end tire and ground clearance. The Skyjacker level lift spacers simply attach to the top of the O.E. coil-over shocks/struts. Unlike the polyurethane kits, this top mount design does not require any special tools, coil spring compressor, or disassembly of the strut.

A complete leveling kit includes 2 front spacers, all the necessary hardware, and a tube of thread locking compound. It only takes about an hour and a half for most installations and does not affect the O.E. ride quality.

Skyjacker offers leveling kits for many 2WD and 4WD vehicles including Toyota Tacoma, Tundra, & FJ Cruiser, Chevy/GMC 1500 Pickups, and Ford F-150’s.

To order call 800-578-8132.

View all Skyjacker Products

Superlift Level-It Coil Spacer Leveling Kits

 

Superlift offers leveling kits for front coil-sprung trucks ranging in lift height from 2 to 3.5 inches. Depending on application, this will allow for the fitment of tires and fit up to 37 inches in diameter. Superlift’s coil spring spacers can be use to level front lift height to match the rear, or to compensate for the added weight of a winch and bumper or snowplow to raise the front back to stock height. They are designed for silent operation throughout suspension cycling, utilizing spacers that mount on top of the factory coils. Most level lift spacer systems employ laser-cut 7mm (thicker than 1/4″) steel in construction of the spacers. Taller systems (3″ to 3.5″) can result in a slightly rear-low stance that is popular in some areas. However, for those who want a level lift stance or the want to maintain the factory rear-high rake, a variety of optional rear blocks and add-a-leaf kits are available, to suit every taste or preference. Applications are available for many Ford Super Dutys, 1/2-ton 2WD Chevys and 4×4 Dodge Rams.

To order call 800-578-8132.

Superlift Level-It Torsion Key Leveling Kits

The Superlift Level-It torsion key leveling kit systems offer economical ways to eliminate the factory nose-down rake on late-model trucks and SUVs with torsion bar front suspensions. Installing a suspension level lift system can allow a truck to accommodate larger tires/plus-sized wheels, correct suspension sag or compensate for the added weight of a winch or snowplow. For torsion-bar IFS trucks, Level-It level lift kits use replacement Torsion Keys that provide 1.5″-2.5″ of adjustable lift, allowing the use of tires up to 35 inches tall, on some applications. Superlift Level-it Torsion Keys are made from forged steel and the Torsion Keys are 25% stronger than OE. Level-It Torsion Keys are indexed to provide lift without increasing torsion-bar pre-load. Torsion-bar Level-It leveling kits include any necessary adjusting bolts (to prevent “over-cranking” the bars) and shock extensions to accomplish the job in about two hours. Applications are available for 1999-2007 4WD and 2WD Chevy/GMC, 1997-2004 Ford F-150 4WD and Dodge Ram 1500 4WD.

To order call 800-578-8132.

Superlift Level-It Front Strut Leveling Kits

Superlift’s affordable, easy-to-install Level-It suspension leveling kits raise a vehicle’s front suspension to sit level with the rear. For trucks and SUVs that have coilover front struts – such as many 2007 1/2-ton Chevys/GMCs and the new Toyota FJ Cruiser and pickups – the Level-It leveling kits incorporate extension spacers. Level-It components are made from 6061-T6 billet aluminum or 7mm (thicker than 1/4″) plate steel that’s welded and finished in black powdercoat. Level-It strut spacers will allow trucks to fit up tires of up to 33 inches in diameter, on some applications. Factory ride quality is retained, and specialized tools aren’t required for installation. Superlift strut type level lift kits include modified extension stops as necessary and 10.9-grade metric hardware. The Level-It extensions are easily removable should the vehicle need to be returned to stock. All Level-It leveling kit components are precision-engineered and are backed by Superlift’s Limited Lifetime warranty.

To order call 800-578-8132.

View all Superlift products

Trail Master Leveling Kit For The 2007-08 Toyota Tundra

 

Trail Master offers a new leveling kit for the 2007-08 Toyota Tundra truck P/N TL223. The level lift system is designed to lift the front of the vehicle 2-1/2 inches, leveling the vehicle look and ride. The leveling kit consists of two, CNC machined, high-grade aluminum spring spacer sets. Trail Master states that their leveling kits are the easiest and most economical way to level out the ride on your Toyota pickup and add the larger wheels and tires you desire. The trail master Toyota leveling kit installs in 3-4 hours. If you are looking to keep the factory raised tail look while increasing overall height, Trailsmaster also offers the T4502 lift kit that includes the level lift components and also adds 1-1/2 inch rear lift blocks, new u-bolts and all required hardware.

To order call 800-578-8132.

  • P/N TL223
  • P/N T4502

If you’re looking for a level ride instead of the stock nose look on your torsion bar suspended truck, Trail Master has the answer. Just ranking up the stock torsion keys adds additional spring preload to your suspension, giving it a bouncier ride and a harsh impact over pot holes. Trail Master’s torsion bar keys are manufactured to maintain the factory torsion bar preload while adjusting the ride height of your truck for a level lift and added tire clearance. The Trail Master torsion bar keys are easy to install and in most applications, will allow you to add 33-inch tires while leveling out the front and rear ride height.

The torsion bar keys are e made from forged steel for superior strength and reliability. Some applications also include shock extensions to maintain an OEM quality ride and to properly keep your factory shocks in the proper operating range. All trail master products are made in the U.S.A and are backed by a limited lifetime warranty. Available for 1988-2008 GM, Dodge and Ford model trucks and sport utility vehicles using a torsion bar suspension.

To order call 800-578-8132.

View all Trail Master products

  • Source:
  • ORA Magazine
  • www.oramagazine.com